36V lithium manganese oxide battery it is a common lithium battery used in electric bicycles, electric scooters and other equipment. In order to ensure the safety and stability of the battery, it is usually necessary to use a Protection Board to protect and manage the battery. This article will introduce the wiring method of 36V lithium manganese oxide battery protection board to help you connect the protection board correctly and ensure the normal use and safety of the battery.

First of all, let's understand the basic structure of 36V lithium manganate Battery Protection Board. Generally speaking, the protection board includes positive and negative electrode connection terminal, battery positive and negative electrode connection terminal, Balance line connection terminal and other parts. Before wiring, make sure that the functions and functions of each part are understood in order to connect correctly.

The following is the wiring method of 36V lithium manganate battery protection board:

1. connect the main positive and negative poles of the battery: first, connect the positive and negative poles of the battery pack to the positive and negative terminals on the protection board respectively. Generally, the positive connecting plate is marked with "P +" or "B +", and the negative connecting plate is marked with "P-" or "B-". Make sure that the positive electrode of the battery is connected to the positive terminal of the Protection Board and the negative electrode is connected to the negative terminal of the Protection Board.

2. Connection balance line: 36V lithium manganese oxide battery is usually composed of several 3.6V single cells. In order to ensure the voltage balance of each single cell, Balance line need to be connected. Generally, the balance line connection terminal is marked with a number corresponding to the connection position of each single battery. Connect the Balance line to the terminal at the corresponding position to ensure the voltage balance of each single cell.

3. Connection test: After completing the above two steps, you need to carefully check whether all the wiring is connected correctly to ensure that there is no wrong connection or reverse connection. Pay special attention to whether the positive and negative connections are correct to avoid short circuit or other safety problems.

4. Test protection function: after the connection is completed, a simple test can be performed to ensure that the function of the protection board is normal. You can observe the working status of the protection board by connecting the charger or load to ensure the normal operation of the protection function during charging and discharging.

Note that the above wiring method is based on the general wiring method of 36V lithium manganate Battery Protection Board. The specific wiring method may vary depending on the protection board of different brands and models. Before wiring, it is recommended to carefully read the instructions of the battery and Protection Board to ensure that the relevant wiring details and precautions are known.

When wiring, be careful to avoid battery short circuit or other safety problems caused by wiring errors. If you are not sure about the wiring method or have any questions, it is recommended to seek help from professionals or consult relevant technical support. Correct wiring can ensure the safe operation and performance of the battery, thus prolonging the service life of the battery and ensuring the safe operation of the equipment.