联系我们
东莞聚能新能源科技有限公司
137 5142 6524(高燕)
susiegao@power-ing.com
广东省东莞市大朗镇兴辉源高新产业园
23串磷酸铁锂72V 20Ah动力锂电池组定制案例
时间:2026-03-11
型号编码: IFP-2265146 23S2P-73.6V 46Ah-PCM-老化-(带外壳)
标称电压:72V
标称容量:20Ah
出厂电压:≥73.6V (带电量30%)
执行标准:GB/T36972-2018
工作温度:0~45℃(充电),-20~60℃(放电)
产品规格:300*200*150mm
产品重量:≈23kg
| No. |
内容 content |
测试方法 Testing method |
备注 Remark |
| 1 |
充电截止电压Charge cut-off voltage | 79.4V±1% |
|
| 2 |
放电终止电压Discharge cut-off voltage | 59.8±0.5V |
|
| 3 |
标准充电模式 Standard charge |
在环境温度25±2℃条件下,以0.2C电流恒流充电至79.4V,转79.4V恒压充电,直到充电电流≤0.05C。Under the condition of the ambient temperature of 25±2℃,Charge the battery at constant current of 0.2C to reach 79.4V. Then charge the battery at constant 79.4V voltage until the charging current decreasing to 0.05C. |
|
| 4 |
标准放电模式 Standard discharge |
以标准充电模式满充后,搁置1小时,以0.2C电流恒流放电至59.8V。 After the standard charging,rest for 1 hour then discharge to 59.8V@0.2C. |
|
| 5 | 出货电压 Shipments voltage |
71.3-73.6V | 带电量≤30 % |
| 6 | 最大充电电流 Maximum Charge Current |
≤15A |
| 7 |
最大持续工作电流Maximum continuous working current | ≤80A |
|
| 8 |
容量 Rated capacity |
标称容量Typical capacity:46Ah 最小容量Minimum capacity:46Ah-5% |
标准充电然后标准 放 电 standard discharge after standard charge |
| 9 |
工作温度Operation temperature range | 充电:0~45℃ | 湿度:60±25% 60±25%R.H |
| 放电:-20~60℃ | |||
| 10 |
储存温度Storage temperature |
小于 1 个月:-20 ~ 45℃ ≤1 month: -20 ~ 45℃ |
湿度:60±25% 长时间储存最佳温 度 :10~25℃ 60±25%R.H Best 10~25℃ for long-time storage |
| 小于 3 个月:-10 ~ 30℃ ≤3 months: -10 ~ 30℃ |
|||
| 小于 1 年:0 ~ 30℃ ≤1 year: 0 ~ 30℃ |
|||
| 11 | 内阻 Impedance |
<120mΩ |
|
| 12 | 重量 Weight |
Approx:23KG |
带外壳 |
联系我们
东莞聚能新能源科技有限公司
137 5142 6524(高燕)
susiegao@power-ing.com
广东省东莞市大朗镇兴辉源高新产业园
联系客服



粤公网安备 44190002007491号